Wilkerson Instrument Co., Inc.
Signal Conditioners, Isolators,  Wireless Transmitters,
Two Wire Transmitters,  Digital Process Indicators
 
900 MHz/2.4 GHz Wireless Transmitter 900 MHz/2.4 GHz Wireless Transmitter Wireless RTDWireless 4-20mA Signal

900 MHz/2.4 GHz Wireless Transmitters



Eliminate Expensive Wiring & High Cost Installation

Whether you need to run signals a few hundred feet or 20 miles the SensoRAD™ Wireless Transmitters are Simple to Use, Cost Effective, and Very Reliable. Simply connect up to two 4-20mA signals or RTD or Strain Gauge and four contact closures and begin receiving the exact signals up to 20 miles away. These small DIN Rail mounted devices operate on license free ISM 900 MHz or 2.4 GHz frequency bands using frequency hopping spread spectrum technology. Plug-in preamplifiers are available for dual 4-20 mADC, RTD's or Strain Gauges. The strain gauge preamp includes a precision 10 VDC excitation supply for up to 4 strain gauges.
Plug-in Signal Conditioner

Mighty Module Plug-In Signal Conditioners

Signal Conditioners, Signal Isolators, Signal Transmitters, Signal Converters, Alarms, Math Functions, Integrators, Valve controllers, Power Supplies. Inputs for DC Voltage, DC Current, AC Voltage, AC Current, Thermocouple, RTD, Strain Gauge, Frequency and Potentiometer.  AC and DC Power options available.
DIN Rail Signal Conditioner

DIN-MOD DIN Rail Signal Conditioners

Signal Conditioners, Signal Isolators, Signal Transmitters, Signal Converters, Loop Powered Isolators.

Inputs for DC Voltage, DC Current, AC RMS Voltage and Current, Strain Gauge, Frequency, Potentiometer. AC and DC Power options available.

Features Plug-In terminal blocks, User selectable Input and Output Ranges, Choice of power options. UL Recognized. Permanent Warranty.

DR Series DIN Rail Instruments

Signal Conditioners, Signal Isolators, Signal Transmitters, Signal Converters.

DIN Rail Signal ConverterThree Phase Monitor - Monitors voltage on two phases of a three phase line. Indicates and alarms on phase failure, low voltage, and phase reversal.

Back-Up Lift Station Duplex Pump Control - Takes over control of duplex pump systems in the event of primary control failure.

This thin profile DIN rail package offers a full range of signal conditioning, monitoring, and control solutions. The case features plug - in terminal blocks and a metal DIN rail clip.

Two Wire Transmitters

Thermocouple TransmitterThe SR Series Two Wire Transmitters offer input for DC Voltage and DC Current, Thermocouple and RTDs in a 50 mm Case size for DIN connection heads, flat panel or DIN rail mounting. Plug In range cards offer the ability to change ranges in the field.  Some models offer galvanic input to output isolation.Two Wire Transmitter

TW Series Two Wire Transmitters offer an economic solution for applications requiring low cost transmitters for Potentiometer, RTD and Thermocouple inputs.

RTD TransmitterThe SC Series Two Wire Transmitters feature universal temperature sensor inputs programmable via an onboard keypad or by remote RS232 interface.  Linearization for thermocouple types J,K,T,R,S,E, and N is provided as well as inputs for 2, 3 and 4 wire Platinum RTDs. 

The SC5010 Two Wire Transmitter also features a 4 1/2 digit digital display and galvanic input to output isolation.

DIS Digital Process Indicators

Digital DisplayThe DIS Series 1/8 DIN Digital Process Indicators feature a rugged NEMA 4 housing. Inputs are available for DC and AC Voltage and Current, Thermocouples, RTDs, Frequency, Strain Gauge and Potentiometer.  One or two alarms as well as isolated retransmitting outputs are available on some models