Panel Meter Selection Guide
Digital Panel Meter
Exceptional accuracy and high read rate with five digital voltmeter ranges from 200.00 mV to ±300.0 V and four digital ammeter ranges from ±2.0000 mA to ±5.000 A, all factory pre-calibrated. Shipped ready to run.
AC RMS Panel Meter
Five AC RMS voltmeter ranges to 200.00 mV to 600.0 V and four AC RMS ammeter ranges from 2.0000 mA to 5.000 A, all factory pre-calibrated. Shipped ready to run.
& Strain Meter
User-scalable for display to ±99,999 for process signals requiring zero and span adjustment, such as 0-1 mA, 4-20 mA, or 0-10 V. Ideal for use as a readout for pressure transducers (manometer applications) and flow meters. Includes 5, 10, 24 V transducer excitation output (user-selectable).
Meter & Totalizer
User-scalable for display to ±999,999 for 0-1 mA, 4-20 mA, or 0-10 V process signals requiring zero and span adjustment. Ideal as flow rate meter or flow totalizer for analog flow meter signals. Includes 5, 10, 24 V transducer excitation output (user-selectable).
Cell & Microvolt Meter
A high-sensitivity 5-digit meter for use with load cells, strain gauges and microvolt input signals where high accuracy and stability are required. Load cell operation allows 4- or 6-wire hookup and display in engineering units, such as lbs, kg or psi. Built-in excitation for up to four 350-ohm load cells in parallel.
/ Weight Meter
Equipped with a DC or load cell signal conditioner, this Laureate offers special firmware for scale / weighing applications: two tare functions; count by 1, 2, 5, 10, 20, 50 or 100; auto-zero function; setpoint offset, and dummy right-hand zero for display to 999,990. Built-in excitation for up to four 350-ohm load cells in parallel.
High accuracy in one instrument for seven thermocouple types (J, K, T, E, N, S, R), each in one range. User-selectable thermocouple type, °C or °F, and 1° or 0.1° resolution. Pre-calibrated for all sensor types. Wide range of options for communication and temperature control. Shipped ready to run.
Exceptional accuracy RTD temperature meter for Pt100 100-ohm platinum RTDs (DIN or ANSI alpha), Ni120 nickel and Cu10 copper. User selectable RTD type, unit of measure (°F or °C) resolution (1° , 0.1° or 0.01°), and 2, 3 or 4-wire hookup to eliminate lead resistance effects. Pre-calibrated for all RTD types. Wide range of options for communication and temperature control. Shipped ready to run.
Factory calibrated for five jumper selectable resistance ranges from 20 Ω to 200 KΩ. Exceptional accuracy of ±0.01% of full scale. In the 20-ohm range, resolution is 1 milliohm, making the meter suitable for contact resistance measurements. 2, 3 or 4 wire connection to eliminate lead resistance effects.
All capabilities of the Laureate process meter, plus custom curve linearization. Setup is easy using an external PC and linearizing software furnished by Laurel. For example, display liquid volume in irregularly shaped tanks, use with non-linear transducers, or extend the working range of nominally linear transducers.
Loop-Powered Digital Panel Meter
Scalable process meter powered by 4-20 mA, 10-50 mA or 1-5 mA current loop, with no need for external power. 12.7 mm (0.50") high LCD digits, 1/8 DIN case.
Series Digital Panel Meter
Low-cost, screwdriver-adjusted 3 1/2 digit indicators for process signals (4-20 mA, 1-5 V, etc.), DC, AC avg, and AC rms (voltage & current). No control outputs.14.2 mm (0.56") high digits, 1/8 DIN case.
Microminiature Digital Process Meter
Fits 22.5 x 45 mm cutout. Accepts 4-20 mA, 0-10 mA, 0-2 V, 1-5 V, or 0-10 V signals. Powered from 10-30 Vdc.
Series 2", 4", 6" or 8" Large-Digit
Available with four or six 57 mm (2.2"), 102 mm (4"), 150 mm (6"), or 200 mm (8") high digits for process signal, strain gauge, load cell, temperature, and pulse inputs. Optional dual 5A relays, analog output, and serial output. Choice of display brightness and cases for indoor or outdoor mounting.